Insight Technology 3/24/2012 9:14:39 PM I don’t/won’t shoot anything but my reloads through my Glocks, including my G20 and G29. I do load all my 180gr bullets to 1.250″, but I doubt if the o.a.l. is causing the problem. The fact that the problem occurs, regardless of powder, and the fact that you’re getting good, strong ejection would lead me to believe that the problem might be (as much as you don’t want to hear it) an occasional limpwrist. Sometimes the problem is with the elbows and not the wrists. Many times it’s after a long string of shots, when you unconsciously let either your wrist break or your elbows flex just a little too much. I don’t load XTPs, but I doubt if they’re the problem in your situation, though, I load mostly Precision Delta 180 gr. fmj fn. Maybe they just feed better than the XTP hollow points. The fact that you’re having the problem with both the factory and KKM barrel reinforces my above suggestion. Kernman

8/5/2010 11:40:42 AM Fantastic mags! bluefalcon 8/20/2010 9:02:06 PM I’ve got one. I use it as essentially a fixed mag. The magazine catch on the SKS isn’t the easiest to operate and unless you get the modified bolt, you can’t attach a full magazine while the bolt is closed. None of that is the fault of tapco‘s product, though. Mine works fine and seems well constructed. buffetdestroyer

3/6/2012 10:15:47 AM Picked up two tapco 20′s, did the check and file bit this morning. Both of them now fit, can be removed and installed fairly easily, andAR-15 Accessories e still nice and snug in the receiver. NOTE: apparently when they opened up the mag well, they did not do a very good job deburring; thereAR-15 Accessories e a few burrs thatAR-15 Accessories e gouging the mags, and were keeping them from locking down all the way. My dremel is charging, and I will address them tomorrow. Twizter68

7/5/2008 2:48:21 PM Only reason I can see for an average shooter to consider the ML3 above theAimpoint Comp ML2 is the availability of a 2MOA dot – which is a bit better for longer range shooting (although it gives up a bit for ease to acquire in close) Chuck25

10/17/2011 5:46:38 PM death451 taught me all I need to know about Ghillie Suit suits. It’s more than just a weekend job, though, if you make your own. Christhelaborer

1/2/2010 12:19:42 AM 98Z5V: GreatDane: Guess I’ll just call on Monday and find out about the apertures on the MBUS… The MBUS has both small and large apertures.You see the small one most of the time, but flip it forward to put it down, exposing the large aperture only. I never even realized till now that it had the larger apperature chadwick76